The new Artist Series vocal condenser microphone is tailored for exacting detail and high-fidelity vocal reproduction. With a condenser design for studio-quality performance, the ATM710 delivers remarkable clarity. The microphone is equipped with an integral 80 Hz hi-pass filter that provides easy switching from a flat frequency response to a low-end roll-off position that reduces the microphone's sensitivity to popping in close vocal use. The ATM710 is also equipped with a switchable 10 dB pad that lowers the microphone's sensitivity, providing higher SPL capability. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

Category: .
  • Description
  • Additional Information
    Additional Information
  • Reviews (0)
    Reviews (0)

Product Description

AE2500 Specifications
Element Condenser, dynamic
Polar Pattern Cardioid
Frequency Response 20-17,000 Hz (condenser) 30-10,000 Hz (dynamic)
Low Frequency Roll-Off 80 Hz, 12 dB/octave (condenser)
Open Circuit Sensitivity -51 dB (2.8 mV) re 1V at 1 Pa (condenser) -54 dB (1.9 mV) re 1V
at 1 Pa (dynamic)
Impedance 100 ohms (condenser) 600 ohms (dynamic)
Maximum Input Sound Level 148 dB SPL, 1 kHz at 1% T.H.D. (condenser)
Dynamic Range (Typical) 124 dB, 1 kHz at Max SPL (condenser)
Signal-To-Noise Ratio 70 dB, 1 kHz at 1 Pa (condenser)
Phantom Power Requirements 11-52V DC, 3 mA typical (condenser)
Switch (Condenser Only) High-pass filter; 10 dB pad (nominal)
Weight 390g
Dimensions 55mm X 165mm (Diameter X Long)
Output Connector Integral 5-pin XLRM-type
Accessories Furnished AT8471 isolation clamp for 5/8”-27 threaded stands; 5/8”-27 to
3/8”-16 threaded adapter; soft protective pouch

Additional Information


Audio Techinca

Product Type

Pro Mics


There are no reviews yet.

Be the first to review “ATM710”

Your email address will not be published. Required fields are marked *